Automotive Front Windshield Bent Glass Washing Machine

WASHING MACHINE FOR FRONT WINDSHIELD BENT GLASS (HIGH PRESSURE WASHING)

MODEL: LV-QX2000

1. Machine Application:

• For washing and drying bent glass, especially for auto glass.

Windshield for automotive glass

BENT GLASS 1 : High pressure pump washing

2. The main technical requirements

• Glass spec:
• Max. 2000×1250 mm
• Min. 1100×500mm
• Glass thickness: 1.6-3.0mm
• Glass feeding height: 850±30mm
• Glass feeding direction: Transverse feeding / tip side ahead / protruding face up
• Cycle time: single glass sheets / hour(maximum)
• Chamber ( deepness ): Max 240mm
• Transverse chamber: max 40mm,
• Glass feeding speed: 3-12m/min adjustable
• Drying speed: 10m/min

3. The part of mechanical is divided into three main sections

3.1. Washing section

• Stainless steel sealed room with access door
• Feeding system
• Pre-washing ( Hot water)
• High pressure washing ( Hot water)
• Clean water rinsing

3.2. Drying section

• Feeding system
• Stainless steel sealed room with access door
• Adjustable air knife ( manual and mechanical)

3.3. Fan blower

• Sound insulation box with filter access door
• Filter system with pressure detector
• Fan

4. Main configuration

Motor + reducer: 1 SET

Fan motor: 2SETS

Pump: 2SETS

PLC: 1SET , Schneider

Inverter: 3SETS,Schneider

Glass sensor: 2SETS

Pneumatic part +Valve:SMC or FESTO

Touch screen: 1SET, Schneider

Water tank heater : 2SET

Filter: Domestic brand with CE

Conveyor belt: Imported

Bearing: SKF

WASHING MACHINE FOR FRONT WINDSHIELD BENT GLASS (HIGH PRESSURE WASHING)